How to paint Faux shutters

How to paint Faux Shutters

Faux hatches are cosmetic functions for the outside of your home. Usually depicted so that they match the trim, they fade over time with exposure to the sun. Paint them to refresh the colour and opacity of the fading. Faux hatches to paint is much like functional hatches to picture but without the care of making them unusable by the accumulation of paint and disabling moving parts. Faux hatches have no moving parts, so they are easier to prepare and paint than traps with running slats and panels.
Instructions

  • Locate and remove the screws that keep the hatches on the wall with a screwdriver. Set the bolts reserved on the traps later.
  • Wash the hatches with mild detergent and a scrub brush. Rinse them with clean water and let it dry.
  • Cover a flat surface in a well-ventilated, or outdoors, with newspaper. Lay enough newspaper to fit all of the hatches. Place the traps face-up on the papers.
  • Spray an even layer of spray primer over the face of the hatches and edges, holding the nozzle about 10 inches away from the hatches. Spray in the cracks between slats and along the joints between slats and the frame. Use a primer suitable for the material of the traps. The most common elements are vinyl or wood.
  • Spray an even coat of paint over the surface and outside the edges of the hatches. Use a spray paint suitable for the material of the traps. Spray in the cracks and crevices, if you did with the primer. Allow the paint to dry.
  • Replace the hatches and re-install the screws with a screwdriver.





Komentar

Postingan populer dari blog ini

Build Log Cabin Double Wide Mobile Homes? This Is Great Tips

Landscape ideas to sell a house

How to paint Faux boulders on a Patio